Paver Installation in Pismo Beach, CA
Paso Robles Landscaping installs paver patios, driveways and walkways for homes in Pismo Beach, from the Shell Beach bluffs and hillside streets to the neighborhoods near downtown. Pavers give you a clean, durable surface that handles coastal weather and is easy to repair if a section ever needs to come up.
What we install
- Paver patios for dining, lounging and fire pits.
- Paver driveways and parking pads built on a deeper base for vehicle loads.
- Walkways, entries and steps that tie the front and back yard together.
- Permeable pavers that let rain soak in on sloped or tight lots.
- Borders, banding and seat walls to finish the edges.
Want a paver project priced for your Pismo Beach home?
Built for the coast and sloped lots
Pismo Beach homes get fog, salt air and steady afternoon wind, and many lots slope toward the street or the ocean. We excavate to firm soil, build a compacted base sized for foot or vehicle traffic, set edge restraints, and slope every surface so water drains away from the house. On hillside lots we often add a step, a short wall or a drain line so the paving stays put through winter storms.
Permits and City rules
Pismo Beach is an incorporated city, so its own departments apply. Work in a City right-of-way or easement, such as a new driveway approach, needs an Encroachment Permit from the Engineering Division. Under the City’s stormwater program, projects with at least 2,500 square feet of new and replaced impervious surface need a Stormwater Control Plan. Low walls and fences in front yard setbacks are limited to 42 inches, and blufftop lots have extra limits and may need a Coastal Development Permit (see the City’s fences, walls and hedges FAQ). Patio covers, outdoor kitchens and other building work go through the Building Division, and work that changes the footprint or exterior can need Planning approval first (how to apply). We check what your project needs before we start.
How a paver project runs
- Free site visit and layout ideas.
- Written estimate with paver style, base depth, edging and drainage.
- Permits or City plans where needed.
- Excavation, base, bedding sand, pavers, edge restraints and joint sand.
- Final compaction, cleanup and a walkthrough.
Related: paver installation, pavers in Arroyo Grande, pavers in San Luis Obispo, pavers in Nipomo, patios in Pismo Beach, concrete flatwork in Pismo Beach, retaining walls in Pismo Beach, drainage in Pismo Beach, outdoor kitchens in Pismo Beach.
Building a new home or remodeling too? Our sister companies are Harrod Built, a family general contractor for custom homes and remodels, and Harrod Drafting & Design, which draws plans for custom homes, remodels and additions. One family can carry the house, the plans and the yard.
Common questions
Do I need a permit to install pavers in Pismo Beach?
A backyard paver patio on your own lot usually does not need a building permit. Work in the City right-of-way, such as a new driveway approach or parkway, needs an Encroachment Permit from the Engineering Division. Large projects that add or replace 2,500 square feet or more of impervious surface need a City Stormwater Control Plan.
Are permeable pavers a good choice in Pismo Beach?
Often, yes. Permeable pavers on an open-graded base let rain soak in instead of running to the street, which helps on sloped lots and with the City’s stormwater rules. We check how the City will count them for your project.
Will pavers hold up to salt air and coastal wind?
Yes. Concrete and natural stone pavers handle fog and salt air well. We use polymeric or properly compacted joint sand and edge restraints so wind and water do not wash the joints out.
Can you do a driveway and a patio in the same job?
Yes. Many Pismo Beach projects pair a paver driveway or entry walk with a backyard patio, steps and a low wall, so the materials match front to back.